Computer service centre

Digiserv Ltd

Contact us

Debit and Credit cards accepted Computaplace on Facebook Computaplace on Twitter Computaplace Google+ Page

Computer Services

Open from Mon to Sat
from 9.00am - 5.30pm

HyperX XMP Beast 8GB Kit 2 x 4GB, DDR3, 2400MHz PC3-19200, CL11, DIMM Memory

Order Code: 

MDSK-210

Manufacturer: 

KINGSTON


Manufacturers Code and link:

MDSK-210

availability : 

next working day

Price : 

£

90.60


Overview
Specification
Ask a question

Overview



HyperX XMP Beast KHX24C11T3K2/8X
8GB (4GB 512M x 64-Bit x 2 pcs.) DDR3-2400 CL11 240-Pin DIMM Kit
 
HyperX KHX24C11T3K2/8X is a kit of two 512M x 64-bit (4GB) DDR3-2400 CL11 SDRAM (Synchronous DRAM) 1Rx8 memory modules, based on eight 512M x 8-bit DDR3 FBGA components per module. Each module kit supports Intel® XMP (Extreme Memory Profiles). Total kit capacity is 8GB. Each module kit has been tested to run at DDR3-2400 at a low latency timing of 11-13-13 at 1.65V. The SPDs are programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. Each 240-pin DIMM uses gold contact fingers and requires +1.5V.
 
 
 
Features
 
• JEDEC standard 1.5V (1.425V ~ 1.575V) Power Supply
• VDDQ = 1.5V (1.425V ~ 1.575V)
• 667MHz fCK for 1333Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 9, 8, 7, 6
• Posted CAS
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• PCB : Height 1.827” (46.41mm) w/ heatsink, single sided component






No further specifications available